Cm2250 valve guide seals leaking |
10-24-2016, (Subject: Cm2250 valve guide seals leaking ) Post: #17 | |||
| |||
RE: Cm2250 valve guide seals leaking all you need is the spring compressor - the part numbers in my toolbox but im not near it at this moment. 1 - remove the injectors - you dont need the tool you can get them out fairly easily with a small heel bar. 2 - bar the cylinder over to TDC, use a ziptie in the injector hole to verify TDC. 3 - use the spring compressor and remove all 4 springs. 4 - use needle nose pliers to remove old stem seals, install new updated seals - you do not need a tool really they just push right on. 4 - reassemble and move to the next cylinder. | |||
|
« Next Oldest | Next Newest » |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.