Cm2250 valve guide seals leaking

[joed2323]

Is their anyway of getting the seals out without buying another remover tool?

One poster said I needed a valve seal remover and installer and it seemed others said I didn't, unless I misunderstood?

I dont want to get the valve springs off and then wonder? well how do I pull those guide seals out?

So I need new injector tips? Something else needed to do this "simple job" unless these inj tips come with the valve guide seal kit, that was stated, "its all I need to complete this job"

Seems like this was a simple do it yourself job, then a few ppl commented about what was needed and maybe what wasnt?

I currently have the valve spring compressor tool that just came in, guessing just pull the injector out and insert valve spring compressor and walla the spring compresses and pull the keepers out. Tdc per cylinder, simple enough, Remove the keepers/spring and then seals are still in place. What do I need to pull them out? Crows foot, something similar or do I need the actual seal puller like one member stated in post?

Im replacing valve guide seals , again I asked what was needed to complete this job, I have the spring compressor tool, but wondering now if I needed another guide seal puller tool, like a member stated previously?

Im anal and a pain in ass, but I do not want to remove the injectors. Compress the springs and wonder what's the best way to pull those guide seals out??? And if the only way to do it the "correct" way is to buy another tool then so be it but if their is alternative way to getting the seals out without "said" tool then...awesome

This seems like a simple job, but never removed valve springs before with head attached to motor nor seals either, and not enough experience on cummins motors, only older detroit motors


Please bare with me guys, thanks yet again