2010 isx cm871
11-18-2026, (Subject: 2010 isx cm871 ) 
Post: #1
2010 isx cm871
Jakes, cruise control doesn’t work at all and speedo meter stays at 0. What’s the probable causes? Truck is a w900l
replyreply
11-18-2026, (Subject: 2010 isx cm871 ) 
Post: #2
RE: 2010 isx cm871
Someone lost all the vehicle settings in the ecm after a re-flash or bad de-mandate?.


User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
replyreply
11-18-2026, (Subject: 2010 isx cm871 ) 
Post: #3
RE: 2010 isx cm871
VSS. The speed sensor on your transmission output. Speed zero = no cruise and no jakes.
replyreply
 Thanks given by: Rawze
11-18-2026, (Subject: 2010 isx cm871 ) 
Post: #4
RE: 2010 isx cm871
(11-18-2026 )Rawze Wrote:  Someone lost all the vehicle settings in the ecm after a re-flash or bad de-mandate?.

It’s not deleted at all.
replyreply
11-18-2026, (Subject: 2010 isx cm871 ) 
Post: #5
RE: 2010 isx cm871
(11-18-2026 )Nostalgic Wrote:  VSS. The speed sensor on your transmission output. Speed zero = no cruise and no jakes.

I had a clue that was the problem, the same happened to my 9900 eagle and that was the culprit. Just wanted to make sure it wasn’t anything else. Thanks for reply
replyreply




NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.