Why I do NOT Use Lucas (Opinion)...
04-21-2016, (Subject: Why I do NOT Use Lucas (Opinion)... ) 
Post: #13
RE: Why I do NOT Use Lucas (Opinion)...
Actually, GL-5 works just fine!.... I have verified that the newer GL-5 oils are no problem and in my own engine after running mostly gl-5 (1 gallon / 12% at every oil change) in it for 955,00 miles,.. the copper components look beautiful!.

Here is some "yellow metal" form my own engine that ran gear lube GL-5 extensively. These components HAVE NOT YET BEEN CLEAN OR EVEN WIPED OFF YET!...
./uploads/201604/post_2_1461240274_a4345aff0fc3430fa80787f282e78a31.jpg

I actually only ran the GL-4 for about a year towards the end, but switched back on purpose just to see if those claims were true or not.

I don't see any etching or discoloring like that paper shows,... Only what you would normally see in any engine at that age, but a LOT less wear than expected.


User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
replyreply
 Thanks given by: Drybulktanker , AnOldDog , Roysbigtoys


Messages In This Thread
RE: Why I do NOT Use Lucas (Opinion)... - Rawze - 04-21-2016



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.