CM870

[JLDees]

(01-01-2017 )JLDees Wrote:  

(01-01-2017 )Rawze Wrote:  There is no single IMAP sensor on the CM870. The sensors on the intake you have circled are the intake pressure and intake temp sensors.

Go to quickserv.com and register the enigne ser# and you can get a breakdown of the entire engine.

Thanks Rawze, with the internal piping marek4792 mentioned do these sensors have the plugging issues of the cm871s? Hows your engine been since the inframe?

I read that wrong I thought he meant the pipe ran past the sensors so disregard that question, As its equipped with a factory boost gauge would I see erratic readings on the gauge if the pressure sensor was plugged?