cummins x15 |
01-12-2017, (Subject: cummins x15 ) Post: #2 | |||
| |||
RE: cummins x15 My guess is, it's to early to tell, it is still the same block as isx15 so time will tell if cummins corrected it's known issues, going back to the 2350 vs the 2250 counterbore fretting issue, I would say it is probly safe to say, that the fretting issue has defintlely gone done, I hear of very little premature counter bore failure in the 2350 in my area but I could be wrong in the big scale, | |||
|
« Next Oldest | Next Newest » |
Messages In This Thread |
cummins x15 - RPM1 - 01-12-2017, RE: cummins x15 - Running rough - 01-12-2017 RE: cummins x15 - RPM1 - 01-12-2017, RE: cummins x15 - Running rough - 01-12-2017, RE: cummins x15 - RPM1 - 01-12-2017, RE: cummins x15 - Running rough - 01-12-2017, RE: cummins x15 - RPM1 - 01-12-2017, RE: cummins x15 - Running rough - 01-12-2017, RE: cummins x15 - RPM1 - 01-12-2017, RE: cummins x15 - Running rough - 01-12-2017, RE: cummins x15 - RPM1 - 01-12-2017, RE: cummins x15 - Running rough - 01-13-2017, RE: cummins x15 - Running rough - 01-13-2017, RE: cummins x15 - RPM1 - 01-13-2017, RE: cummins x15 - RPM1 - 01-13-2017, RE: cummins x15 - Rig Wrench - 02-14-2017, RE: cummins x15 - Running rough - 02-14-2017, RE: cummins x15 - arch_stanton - 08-29-2017, RE: cummins x15 - Squish099 - 02-23-2017, RE: cummins x15 - Rig Wrench - 02-23-2017, RE: cummins x15 - Running rough - 02-24-2017, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.