Liner Height

Rawze.com: Rawze's ISX Technical Discussion and more

New: Rawze's amazon Page

A big THANK YOU For those who have recently Contributed towards keeping the lights on around here. It helps keep the website costs at bay and goes towards helping others with their trucks.

I want to personally thank everyone who has donated to the forum recently. It helps pay for the $790/month internet bill that the forum consumes. - Thank you again.

YOU NEED AN INVITATION CODE TO Register! -- To obtain an invitation code, please e-mail [email protected] with a reason why you want to join. This keeps the spammers out and our forum clean.

Current time: 05-15-2024, | ShoutboxHello There, Guest! (Login — Register)

Threaded Mode | Linear Mode

Liner Height

01-27-2017, (Subject: Liner Height )

Post: #16

Hammerhead Offline

Offline

Kookoo for Cocoa Puffs (1918 Likes)

Posts: 1,400
Joined: May 2016

Thanks: 1014
Given 1918 thank(s) in 738 post(s)

RE: Liner Height

I've used brass shims before when building hot rod Harley engines. But that's between the cylinder barrels and the crankcase. The liners were interference fit into the ductile iron cylinder barrels.
I agree that the merits of brass "gripping material" for machining purposes is a well known practice. I'd also like to see a comparison of brass vs SS direct contact liner clamping force.
I don't know my @$$ from a hole in the ground on the subject, but I would suspect the brass would have a "gripping" advantage, however I would think the SS would have a deformity resistance advantage as a harder material...
Folks much smarter than I will have to explain this one to my peabrain.

User's Signature: Why? Why do I always ask "why?" Because I can't learn or help teach others with "'cause I said so..."

Return to Top | find

« Next Oldest | Next Newest »

Messages In This Thread

Liner Height - Mr Hagg - 01-25-2017,

RE: Liner Height - Hammerhead - 01-25-2017,

RE: Liner Height - Rawze - 01-26-2017,

RE: Liner Height - Hammerhead - 01-26-2017,

RE: Liner Height - Starlight - 01-27-2017,

RE: Liner Height - un_yun - 01-26-2017,

RE: Liner Height - Rawze - 01-26-2017,

RE: Liner Height - un_yun - 01-26-2017,

RE: Liner Height - Running rough - 01-26-2017,

RE: Liner Height - Hammerhead - 01-27-2017,

RE: Liner Height - Running rough - 01-27-2017,

RE: Liner Height - Hammerhead - 01-27-2017,

RE: Liner Height - Running rough - 01-27-2017,

RE: Liner Height - in2trux - 01-27-2017,

RE: Liner Height - Hammerhead - 01-27-2017,

RE: Liner Height - in2trux - 01-27-2017,

RE: Liner Height - Hammerhead - 01-27-2017

RE: Liner Height - Starlight - 01-27-2017,

RE: Liner Height - Rawze - 01-28-2017,

RE: Liner Height - Mr Hagg - 01-27-2017,

RE: Liner Height - Starlight - 01-28-2017,

RE: Liner Height - Starlight - 01-28-2017,

RE: Liner Height - Rawze - 01-29-2017,

RE: Liner Height - Starlight - 01-29-2017,

RE: Liner Height - gearhead - 01-29-2017,

RE: Liner Height - superbug - 03-01-2018,

RE: Liner Height - Rawze - 03-02-2018,

RE: Liner Height - Waterloo - 03-02-2018,

RE: Liner Height - Hammerhead - 03-03-2018,

RE: Liner Height - Nilao - 03-03-2018,

RE: Liner Height - Waterloo - 03-04-2018,

RE: Liner Height - Waterloo - 03-04-2018,

RE: Liner Height - Hammerhead - 03-04-2018,

RE: Liner Height - tree98 - 03-04-2018,

RE: Liner Height - Waterloo - 03-04-2018,

RE: Liner Height - same101us - 03-04-2018,

RE: Liner Height - Waterloo - 03-04-2018,

NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.

Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication

Powered By MyBB, © 2002-2024 MyBB Group | Theme by Laughing Inc - Web Design