Problem after oil pump shim fixed

new reply

Threaded Mode | Linear Mode

Problem after oil pump shim fixed

02-15-2017, (Subject: Problem after oil pump shim fixed )

Post: #5

gearhead Offline

Established (184 Likes)

Posts: 233
Joined: Jun 2014

Thanks: 25
Given 184 thank(s) in 81 post(s)

RE: Problem after oil pump shim fixed

I have done alot of research on the washing out bearings i don't think it could be done without some major pressures. Cat runs 90 psi cold and about 60 to 75 at highway speed.

Return to Top | find

reply reply

Thanks given by:

Rawze , Texasdude74 , Brock , 386lover , overshot , Starlight , Zapah

« Next Oldest | Next Newest »

new reply

Messages In This Thread

Problem after oil pump shim fixed - Brock - 02-14-2017,

RE: Problem after oil pump shim fixed - Texasdude74 - 02-14-2017,

RE: Problem after oil pump shim fixed - Brock - 02-14-2017,

RE: Problem after oil pump shim fixed - Starlight - 02-14-2017,

RE: Problem after oil pump shim fixed - gearhead - 02-15-2017

RE: Problem after oil pump shim fixed - Starlight - 02-16-2017,

RE: Problem after oil pump shim fixed - Rawze - 02-16-2017,

RE: Problem after oil pump shim fixed - Johnboy - 02-15-2017,

RE: Problem after oil pump shim fixed - Magard - 02-15-2017,

RE: Problem after oil pump shim fixed - Rawze - 02-15-2017,

RE: Problem after oil pump shim fixed - jimeneztrans84 - 02-15-2017,

RE: Problem after oil pump shim fixed - stevesparts - 04-24-2017,

RE: Problem after oil pump shim fixed - Streachy - 04-27-2017,

RE: Problem after oil pump shim fixed - Rawze - 04-27-2017,

NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.