RE:CM 870 EGR TUNE UP GUIDE
06-28-2017, (Subject: RE:CM 870 EGR TUNE UP GUIDE ) 
Post: #13
RE: RE:CM 870 EGR TUNE UP GUIDE
Fire up insite and open up the data monitoring tab. There should be a listing for poor fuel mileage. I would grab a buddy (or just graph and record the drive) and go for a spin. See how all the data looks. It's possible the turbo is not closing property as it's a air pressure controlled VGT. unless I'm mistaken there are no codes if the turbo becomes stuck as the only thing monitored on it is the air supply solenoid. I believe to test the VGT nozzle ring for proper operation is as simple as taking the air line off the turbo and hitting the piston with shop air. I'm not sure the max pressure you can use on a 870. That you'll have to look up in quickserve.

You mentioned cleaning the sensors. Did you clean or replace the imap and exhaust back pressure sensors? Those should not be cleaned but replaced as the passages are too small to get the soot out without pushing some farther into the sensor.

Just a few thought I had while sitting here in a door getting unloaded.
replyreply
 Thanks given by: Rawze , madcash2 , hhow55


Messages In This Thread
RE: RE:CM 870 EGR TUNE UP GUIDE - Nilao - 06-28-2017



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.