Rawze.com: Rawze's ISX Technical Discussion and more / Big Truck Technical Discussion... / Rawze's Technical Documents / CM2350 factory file comparrisons...

new reply
CM2350 factory file comparrisons...
05-04-2024, (Subject: CM2350 factory file comparrisons... ) 
Post: #76
DPS567180 Offline
Established  (0 Likes)  **

 		Posts: 14
Joined: Mar 2022
Thanks: 2
Given 0 thank(s) in 0 post(s)
RE: CM2350 factory file comparrisons...
(04-04-2017 )Rawze Wrote:  ...
For CPL3937 engines. ...
Code:
EF10044 = 450HP/1750trq@1800 RPM. Smart torque reduces torque to 1550 after a short bit.

EF10074 = 475HP/1650trq@1800RPM. It has NO smart torque and has higher torque from 1500RPM and above compared to EF10044 due to the HP increase but slightly less torque (1650 peak) below that.

I have CPL 3937 400ST not demanded my program is EF10049. I run that I-40 from Arizona to Oklahoma and back. Is there a program that will allow me to pull hills a little better but not kill my fuel mileage?
Return to Top | find
replyreply
new reply


Messages In This Thread
RE: CM2350 factory file comparrisons... - DPS567180 - 05-04-2024



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication