Rawze.com: Rawze's ISX Technical Discussion and more / Big Truck Technical Discussion... / Ask Your question... / Oil analysis question?

new reply
Oil analysis question?
05-12-2017, (Subject: Oil analysis question? ) 
Post: #9
Rawze Offline
Forum Reject  (13926 Likes)  *******

 		Posts: 11,019
Joined: Jun 2013
Thanks: 5894
Given 13926 thank(s) in 6084 post(s)
RE: Oil analysis question?
(05-12-2017 )Rex012 Wrote:  I use cat oil analysis it's about 16 bucks or so. But they give you soot measurements and metals and if there's any antifreeze present. They also keep a data base of your truck and you can track what's going on with it. I'm pretty happy with it. I just need to know what are the acceptable levels of metals in the oil just like raw se said lol

HAH, I just noticed that, thanks for pointing that out. I would not run Valvoline in my engine. Valvoline oil is known to have a shorter lifespan for addatives than other brands. Even if this were not the case, 5-40 is too thin if you ask me.

User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
Return to Top | find
replyreply
 Thanks given by: mmssvv , scottydogtruck , Toolguy
new reply


Messages In This Thread
RE: Oil analysis question? - Rawze - 05-12-2017



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication