Rawze.com: Rawze's ISX Technical Discussion and more / Big Truck Technical Discussion... / Ask Your question... / Air fuel control derate?

new reply
Air fuel control derate?
06-04-2017, (Subject: Air fuel control derate? ) 
Post: #4
Hammerhead Offline
Kookoo for Cocoa Puffs  (1918 Likes)  *****

 		Posts: 1,400
Joined: May 2016
Thanks: 1014
Given 1918 thank(s) in 738 post(s)
RE: Air fuel control derate?
As per Quickserve:
100psi at 130rpm while cranking for 10 seconds (no start condition check)
230-270psi at low idle 600rpm
275-325psi at high idle 1800rpm

Insite will tell you the pressure of the fuel rail while connected. Remember, the proper way to test is a mechanical guage connected to the compucheck fitting, but insite is a valuable tool if you don't have a mechanical gauge available.

./uploads/201706/post_2077_1496604636_33ae1d928b0f4268d12c8ebdf92a8a9e.png

Post #20 in this tread has my results, which IIRC are the same as mine were during my road testing.
http://rawze.com/forums/showthread.php?tid=1365&page=4

User's Signature: Why? Why do I always ask "why?" Because I can't learn or help teach others with "'cause I said so..."
Return to Top | find
replyreply
new reply


Messages In This Thread
RE: Air fuel control derate? - Hammerhead - 06-04-2017



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication