Rawze.com: Rawze's ISX Technical Discussion and more / Big Truck Technical Discussion... / ISX Related Help / Sensor in head above...

new reply
Sensor in head above...
06-13-2017, (Subject: Sensor in head above... ) 
Post: #2
Hammerhead Offline
Kookoo for Cocoa Puffs  (1918 Likes)  *****

 		Posts: 1,400
Joined: May 2016
Thanks: 1014
Given 1918 thank(s) in 738 post(s)
RE: Sensor in head above...
I'm not 100% sure where your talking about Waterloo, but would it not be the secondary or backup cam position sensor?
I know the crank has a backup, and I believe the cam does as well.

Edit to add:
Just looked on QS, and in procedure 019-363 is states in the Remove instructions to remove the "Engine Speed Sensor from the cylinder head". I believe this is what you may be referring to.
./uploads/201706/post_2077_1497400690_314aa5328c1ca06d91212af392643c7b.png

User's Signature: Why? Why do I always ask "why?" Because I can't learn or help teach others with "'cause I said so..."
Return to Top | find
replyreply
new reply


Messages In This Thread
RE: Sensor in head above... - Hammerhead - 06-13-2017



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication