| Sensor in head above... |
| 06-13-2017, (Subject: Sensor in head above... ) Post: #3 | |||
| |||
| RE: Sensor in head above... Well, I don't know? There are two? The one I replaced was just off center of the head, next to the ECM. There were two sensors there behind the rats nest of cabling. I replaced the lower one with the metal tab. I looked on QuickServe, it showed the sensors but DID NOT show where they go in either the block or head. | |||
| « Next Oldest | Next Newest » |
| Messages In This Thread |
Sensor in head above... - Waterloo - 06-13-2017, RE: Sensor in head above... - Hammerhead - 06-13-2017, RE: Sensor in head above... - Waterloo - 06-13-2017 RE: Sensor in head above... - Hammerhead - 06-13-2017, RE: Sensor in head above... - Waterloo - 06-13-2017, RE: Sensor in head above... - Waterloo - 06-13-2017, RE: Sensor in head above... - Hammerhead - 06-13-2017, RE: Sensor in head above... - Waterloo - 06-13-2017, RE: Sensor in head above... - Hammerhead - 06-13-2017, RE: Sensor in head above... - Hammerhead - 06-13-2017, RE: Sensor in head above... - Waterloo - 06-13-2017, RE: Sensor in head above... - Waterloo - 06-13-2017, RE: Sensor in head above... - Hammerhead - 06-13-2017, RE: Sensor in head above... - Waterloo - 06-13-2017, RE: Sensor in head above... - gatow900 - 06-14-2017, RE: Sensor in head above... - Waterloo - 06-14-2017, RE: Sensor in head above... - Wiseman - 06-14-2017, RE: Sensor in head above... - Rawze - 06-15-2017, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.