Isx 15 cm2250 problems
08-27-2017, (Subject: Isx 15 cm2250 problems ) 
Post: #5
RE: Isx 15 cm2250 problems
Let's clarify clearance measurement location.
For the intake and exhaust rockers, it is measured between the crosshead (valve bridge) and the rocker nose, NOT between the valve and crosshead.
ONLY the Jake rocker is measured between the rocker nose and the valve pin.
The long rocker is the intake.
The medium rocker is the exhaust.
The short rocker in the center of the group of three is the Jake.


User's Signature: Why? Why do I always ask "why?" Because I can't learn or help teach others with "'cause I said so..."
replyreply
 Thanks given by: scottydogtruck , BobsYourUncle , trucklogger2


Messages In This Thread
Isx 15 cm2250 problems - Pdxt - 08-27-2017,
RE: Isx 15 cm2250 problems - Hammerhead - 08-27-2017
RE: Isx 15 cm2250 problems - Unilevers - 08-29-2017,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.