Upgrading trans heat exchanger to an oil cooler

[Mrkentee]

(09-26-2017 )dhirocz Wrote:  Exactly. I'll be changing out mine as soon as I verify the correct part numbers with Eaton.

180-200 is the temp range I'm looking for. Oil is hot enough to do the job and cool enough to last awhile.

I have same trans. Just bought k-1956 kit to convert to air cooler. Yes, torque rating increases with air cooler. Better cooling, I guess.
I expect lower temps, and no worry about contamination.
I'm using those coolant lines for a Webasto coolant heater for cold mornings.