Poly bushings
11-17-2017, (Subject: Poly bushings ) 
Post: #9
RE: Poly bushings
(11-15-2017 )ZeroNthedark Wrote:  This doesn't address original question from dhirocz, but as far as rear bars, this is what I went with.

http://websst.triangleusa.com/system/tec...1354028008

Didn't want to take a day, or maybe two, off to get originals replaced, so these were good as I could assemble them as time allowed. Price is similar to OE, maybe a little less. Don't know about longevity as they've only been on a month or so, but they do take a beating because I have a rubber block suspension.

The ball-and-socket design is nice for being able to rotate, a big help when trying to get everything lined back up.


Where did you get these?
replyreply


Messages In This Thread
Poly bushings - dhirocz - 11-14-2017,
RE: Poly bushings - Rawze - 11-15-2017,
RE: Poly bushings - dhirocz - 11-15-2017,
RE: Poly bushings - Brock - 11-15-2017,
RE: Poly bushings - Hammerhead - 11-16-2017,
RE: Poly bushings - Waterloo - 11-17-2017
RE: Poly bushings - Hammerhead - 11-17-2017,
RE: Poly bushings - Hammerhead - 11-17-2017,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.