Rawze.com: Rawze's ISX Technical Discussion and more / Big Truck Technical Discussion... / Ask Your question... / Insite cylinder cutout test

new reply
Insite cylinder cutout test
03-25-2016, (Subject: Insite cylinder cutout test ) 
Post: #2
Rawze Offline
Forum Reject  (13929 Likes)  *******

 		Posts: 11,033
Joined: Jun 2013
Thanks: 5897
Given 13929 thank(s) in 6086 post(s)
RE: Insite cylinder cutout test
Never had that problem. I am using Insite 7.6.2

What I look for is that all cylinders fire about the same, and that each one can keep the engine going the same way.

The test is only really valid if you first do an injector leak-down test first though. At the time i made the video, i did not mention it, because I didn't know this either, so that is why it is not mentioned in the video.

The proper method is to first do an injector leak down test, then do this test after it is all back together and no injectors are leaking.

User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
Return to Top | find
replyreply
new reply


Messages In This Thread
RE: Insite cylinder cutout test - Rawze - 03-25-2016
RE: Insite cylinder cutout test - Unilevers - 03-28-2016,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication