Rawze.com: Rawze's ISX Technical Discussion and more / Big Truck Technical Discussion... / ISX Related Help / Help please. ?

new reply
Help please. ?
03-28-2016, (Subject: Help please. ? ) 
Post: #17
Contributing V.I.P.Hedley Offline
Contributing V.I.P.  (57 Likes)  ****

 		Posts: 133
Joined: Jun 2015
Thanks: 57
Given 57 thank(s) in 35 post(s)
RE: Help please. ?
(03-27-2016 )hhow55 Wrote:  
(03-27-2016 )Hedley Wrote:  might be a broken turbo impeller shaft.

Hedley,
Would he be able to remove the front and rear piping from the turbo, then with his hand's turn the impeller blade's on front and rear in opposite direction's to determine if his shaft is broken?
yes, he can remove the air cleaner boot off the Turbo intake side and be able to spin the intake impeller freely, we had one do a nag similar to what he is describing, and this is what we found in our case.


User's Signature: In the immortal words of Romeo as he gazed upon Juliet's eyes..."Wait...We Drank What?!"
Return to Top | find
replyreply
new reply


Messages In This Thread
RE: Help please. ? - Waterloo - 03-27-2016,
RE: Help please. ? - Waterloo - 03-27-2016,
RE: Help please. ? - Hedley - 03-27-2016,
RE: Help please. ? - hhow55 - 03-27-2016,
RE: Help please. ? - Hedley - 03-28-2016
RE: Help please. ? - hhow55 - 03-27-2016,
RE: Help please. ? - Waterloo - 03-27-2016,
RE: Help please. ? - Rawze - 03-27-2016,
RE: Help please. ? - hhow55 - 03-27-2016,
RE: Help please. ? - Rawze - 03-27-2016,
RE: Help please. ? - gearhead - 03-28-2016,
RE: Help please. ? - in2trux - 03-29-2016,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication