My truck and it's shenanigans.
02-16-2018, (Subject: My truck and it's shenanigans. ) 
Post: #17
RE: Cylinder head swap
Thank you for your input Rawze! I figured the timing was off a tad and trying to get it backed down a tad as the idle was slightly off too but was unable to get a hold of Unilever or Gearhead lately. I might back down the boost down a bit too as once in awhile it will spike above 40 psi if I don't watch the pedal especially now that I've done the weedburner conversion. Egt gauge never really climbed above 900 degrees.
replyreply


Messages In This Thread
RE: Cylinder head swap - Rawze - 01-30-2018,
RE: Cylinder head swap - Rawze - 01-31-2018,
RE: Cylinder head swap - JMBT - 02-01-2018,
RE: Cylinder head swap - rrod - 02-12-2018,
RE: Cylinder head swap - Rawze - 02-13-2018,
RE: Cylinder head swap - Rawze - 02-16-2018,
RE: Cylinder head swap - marek4792 - 02-16-2018
RE: Cylinder head swap - Unilevers - 02-16-2018,
RE: Cylinder head swap - Unilevers - 02-17-2018,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.