ECM power supply lost with ignition turned on...
02-13-2018, (Subject: ECM power supply lost with ignition turned on... ) 
Post: #6
RE: ECM power supply lost with ignition turned on...
So I replaced the ignition switch and found a few wires on top of the transmission that were rubbed through. Rerouted those and secured them properly to no avail. All can think of now is that there is a DPF sensor involved some way, somehow. A quick scan is showing 3 active codes. Mighty frustrated at this point.
replyreply


Messages In This Thread
RE: ECM power supply lost with ignition turned on... - Meatbag - 02-13-2018



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.