Rawze.com: Rawze's ISX Technical Discussion and more / Big Truck Technical Discussion... / ISX Related Help / ECM power supply lost with ignition turned on...

new reply
ECM power supply lost with ignition turned on...
02-15-2018, (Subject: ECM power supply lost with ignition turned on... ) 
Post: #9
Contributing V.I.P.Signature620 Offline
Contributing V.I.P.  (836 Likes)  ****

 		Posts: 733
Joined: May 2015
Thanks: 625
Given 836 thank(s) in 446 post(s)
RE: ECM power supply lost with ignition turned on...
I usually see 1117 caused by:

- Weak batteries as explained by ZeroNTheDark
- High resistance between batteries and the 4 pin connector @ ECM
- Drivers turning off the battery isolator as soon as they turn the engine off.

Anything that effects unswitched power to the ECM or disrupts it's powerdown cycle will give this code.
Return to Top | find
replyreply
 Thanks given by: Wiseman , Rawze , Meatbag , hhow55
new reply


Messages In This Thread
RE: ECM power supply lost with ignition turned on... - Signature620 - 02-15-2018



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication