| Runs better with Check engine light on |
| 03-29-2016, (Subject: Runs better with Check engine light on ) Post: #1 | |||
| |||
| Runs better with Check engine light on This sounds crazy, but I have a 2010 FRTL with a 871 cummins. When you start accelerating at about 1200 rpm's it feels like you may have a clogged fuel filter.(ive changed that) When you pull a grade the check engine light comes on and the truck runs fine. When you cut the truck off and start to run again, same thing. Skips at around 12-1300 rpms check engine light will come on, and the truck runs fine. I don't have insight software, but have use a Scangauge D and got 3 codes. 254-5-0 135-11-7 and 64-0-0. anyone have an idea? Thanks | |||
| 03-30-2016, (Subject: Runs better with Check engine light on ) Post: #2 | |||
| |||
| RE: Runs better with Check engine light on I tried to run your codes on quickserve, they came back as invalid... So I am thinking those are Freightliner codes not Cummins... Have you called the dealer and asked them to decipher codes? Also, do you have a Turbo Boost Gauge and Pyrometer on that thing? If not, get them. They are not that difficult to install. | |||
| 03-30-2016, (Subject: Runs better with Check engine light on ) Post: #3 | |||
| |||
| RE: Runs better with Check engine light on Mine did that once, turned out to be bad injector | |||
| « Next Oldest | Next Newest » |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.