Boost gauge on DD15
02-23-2018, (Subject: Boost gauge on DD15 ) 
Post: #5
RE: Boost gauge on DD15
The engine ecm requires this to be left alone, it needs it for its own use.
The data to read from this sensor is available on the J1939 data bus.
The fastest and cheapest way to read it would be to purchase a ScanGauge D. It will show boost and many other gauges that are on the databus.
https://www.scangauge.com/products/scangauge-d/
You could also just get a boost gauge from Freightliner, they just plug into the gauges databus daisy chain. But it may require the dealer to activate the gauge.
replyreply
 Thanks given by: gsain , hhow55 , DLC , bossboy2 , Waterloo


Messages In This Thread
Boost gauge on DD15 - gsain - 02-23-2018,
RE: Boost gauge on DD15 - uncleal13 - 02-23-2018



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.