POR 15
04-01-2018, (Subject: POR 15 ) 
Post: #16
RE: POR 15
Are you guys stripping all the brackets and stuff off of the frame to coat it, or just giving it a quickie? I like being very thorough, but that's alot of stuff to move/remove to get the the entire bare frame behind the cab.

I normally sand blast things like that, but they all say to not remove all the rust...so I'm looking at adding a needle scaler to my toolbox just for this.


User's Signature: 2010 T2000, CM871, 13spd, 977k, tanker yanker
Overhauled @ 927k
replyreply


Messages In This Thread
POR 15 - Truck007 - 03-11-2018,
RE: POR 15 - Rawze - 03-11-2018,
RE: POR 15 - dhirocz - 03-11-2018,
RE: POR 15 - Chamberpains - 03-12-2018,
RE: POR 15 - dhirocz - 03-12-2018,
RE: POR 15 - Chamberpains - 03-12-2018,
RE: POR 15 - Rawze - 03-12-2018,
RE: POR 15 - dhirocz - 03-12-2018,
RE: POR 15 - Rawze - 03-13-2018,
RE: POR 15 - Truck007 - 03-13-2018,
RE: POR 15 - Mrkentee - 03-29-2018,
RE: POR 15 - dhirocz - 03-30-2018,
RE: POR 15 - Mrkentee - 03-30-2018,
RE: POR 15 - stevesparts - 04-01-2018,
RE: POR 15 - Mrkentee - 04-01-2018,
RE: POR 15 - dhirocz - 04-01-2018
RE: POR 15 - stevesparts - 04-02-2018,
RE: POR 15 - serv - 04-02-2018,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.