OODO-Cleaning Out The Soot
03-24-2018, (Subject: OODO-Cleaning Out The Soot ) 
Post: #6
RE: OODO-Cleaning Out The Soot
(03-24-2018 )Waterloo Wrote:  I think I would have replaced that Delta P sensor. That is one packed Venturi. Side note, these sensors don't like carb or break cleaner, best to replace. Especially the iMap sensor.

I think I agree with this, I had a shop instructor tell me that carburetor cleaner is only for the metal parts/bits of the carburetor. Thin plastic and rubber parts can be disfigured and/or melt if they are soaked with these strong corrosive solutions. I do like the OP's initiative to take good care of his truck thou.
replyreply
 Thanks given by: Waterloo , bossboy2


Messages In This Thread
RE: OODO-Cleaning Out The Soot - REWB - 03-24-2018



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.