Threaded Mode | Linear Mode

Pd6cas2 · 04-01-2018, **(Subject: CM570 Cams )**

Quote:

Pd6cas2 · 04-01-2018, **(Subject: CM570 Cams )**

Liners and counterbores at .12

Pd6cas2 · 04-01-2018, **(Subject: CM570 Cams )**

Almost ready to start up

serv · 04-01-2018, **(Subject: CM570 Cams )**

(04-01-2018 )Pd6cas2 Wrote: Almost ready to start up

Looks like a nice job, congrats! Do you live in the RGV or just buy your parts there? I live in Harlingen and have a yard in Donna, Tx and one in Laredo. 2 million miles, wow. Any info on the amsoil program that you mentioned above?

Five Star · 04-01-2018, **(Subject: CM570 Cams )**

Great info and great pics as well! Yeah the shop has all correct tooling for critical parts. Any thought on an actual “break in” oil, or just Rotella 15-40? My next question would be, would a guy start it out on gear lube regiment, or wait a oil change or two?

Pd6cas2 · 04-01-2018, **(Subject: CM570 Cams )**

I live 30 miles north St Paul,Mn.
I go to the Valley 11 months out of the year.
Amsoil is not the reason for long engine life,they happen to headquartered right up the Road.
They do my samples and I get results in 48 or less .
Engine was inframed before at 500k,

Pd6cas2 · 04-01-2018, **(Subject: CM570 Cams )**

I do have Amsoil Oil bypass system but not for extended oil drains.

Rawze · 04-01-2018, **(Subject: CM570 Cams )**

(04-01-2018 )Pd6cas2 Wrote: Liners and counterbores at .12

top of that deck looks a little rough for my tastes. Otherwise, lookes good.

Pd6cas2 · 04-01-2018, **(Subject: CM570 Cams )**

Cummins tech says hes working on N14 nonstop.
Guys are buying from salvage yards and when putting together Block deck is too pitted or Counterbores too off...