Helping Waterloo out with an inframe ...

[Waterloo]

A side note to the above update, I am keeping the dealer in the loop as to what we have found so far. I just wrote him a email with photos of the injector cam gear and the other thing we found, which was the rod bearings are pretty tore up for so few actual miles. Mr Hagg was here today and took a look at the bearings and that gear. The bearings to his thinking were installed dirty, and he doubted that any of the lubricant or whatever that stuff is called that you apply to the back side of the bearing was used. We also found some metal shavings in the block, I am suspecting the main bearings. I will post some photos of those rod bearings tomorrow.