Helping Waterloo out with an inframe ...

[pearce trucking]

(05-31-2018 )Waterloo Wrote:  

(05-31-2018 )Mrkentee Wrote:  

(05-31-2018 )Waterloo Wrote:  Going to try to post the video I shot of the truck starting. There are two short clips. The very first attempt, and then we let the starter cool, and the 2nd successful attempt. I stopped filming during starter rest period, which was around maybe four minutes. here goes, let's see if I can get this to work.

Here they are...

https://youtu.be/PpsfujvFKcM

https://youtu.be/1hdRaSD9mqk

That was rather uneventful. Good, though. I expected cheers, and maybe somebody dumping the gatorade jug over Rawze’s head in celebration. :)

And that was the plan, uneventful. Rawze cut the block and helped with head and liner install, everything else was 100% me. I even brought the bulk of the tools used in the in frame. I did not come here for Rawze to rebuild my motor.

It looks really nice. Good paint, new hoses, clamps, etc. Well done. Definitely want updates on how it's running on the road.