Rawze.com: Rawze's ISX Technical Discussion and more / Big Truck Technical Discussion... / Ask Your question... / CM871 oil pressure

new reply
CM871 oil pressure
04-13-2018, (Subject: CM871 oil pressure ) 
Post: #16
Contributing Memberpearce trucking Offline
Contributing Member  (132 Likes)  ****

 		Posts: 163
Joined: Nov 2015
Thanks: 82
Given 132 thank(s) in 76 post(s)
RE: CM871 oil pressure
Well I'll NEVER EVER put dimes in the regulator again. Five in 3 out. Small piece came out from internals of pump. Gears turning fine.
0 psi pressure. Wanna guess where the other 1 3/4 are? I sure would like to know! Hopefully in the rifle before the oil thermostat. Probably where the blockage is. Those dimes can turn right at the passage in the second pic if you aren't careful.


Attached File(s)Thumbnail(s)
      
Return to Top | find
replyreply
new reply


Messages In This Thread
RE: CM871 oil pressure - Brock - 04-12-2018,
RE: CM871 oil pressure - Rawze - 04-12-2018,
RE: CM871 oil pressure - Rawze - 04-12-2018,
RE: CM871 oil pressure - Brock - 04-12-2018,
RE: CM871 oil pressure - Brock - 04-12-2018,
RE: CM871 oil pressure - pearce trucking - 04-13-2018
RE: CM871 oil pressure - Unilevers - 04-13-2018,
RE: CM871 oil pressure - Rawze - 04-13-2018,
RE: CM871 oil pressure - Unilevers - 04-13-2018,
RE: CM871 oil pressure - Unilevers - 04-13-2018,
RE: CM871 oil pressure - Rawze - 04-21-2018,
RE: CM871 oil pressure - Rawze - 05-03-2018,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication