Fuel Lines

[snailexpress]

(04-13-2018 )74bassman Wrote:  I think my truck is sucking in air thru one of the fuel lines connected to the Davco filter. I got 2 new fittings and fuel line. Does anyone have a recommendation on how to get the barb part of the fitting into the fuel line? The line I want to replace has a broken retainer clip, and I think it not keeps a good seal.

If fuel line is plastic only one way get it into fuel line to heat fuel line. I did use boiling water. Hold line in the water for about minute until line is softens then slide fitting in quickly.
Wife's hair dryer will work too. Don't put dryer too close and too hot