how do i pull my steering wheel off?

[tree98]

(04-26-2018 )Rawze Wrote:  

(04-26-2018 )tree98 Wrote:  2007 kenworth t800. I replaced the steering shaft from the firewall to the steering box but now my steering wheel is almost upside down. I can't adjust it anywhere on the shaft because it all only goes together one way. I'm thinking I'll have to pull the steering wheel and bolt it back down in the correct position.

You need to NOT pull off your steering wheel to fix that. You need to go out to the shaft you replaced and correct it properly, otherwise you will cause problems with your clock spring.

Oh ok, well the only other thing I could do is take a U-joint out and turn the yoke 90 degrees and put it back together. That would probably make it better but not exactly right.