Exhaust manifold back pressure sensor tube
05-02-2018, (Subject: Exhaust manifold back pressure sensor tube ) 
Post: #3
RE: Exhaust manifold back pressure sensor tube
(05-01-2018 )Bahdan Wrote:  <snip>
Wanted some advice if anyone has tried this and if it's difficult. Can the front elbow on the exhaust manifold be removed and replaced without the entire manifold being taken off the head?

I'm not sure if this would be doable with the manifold mounted.
If the manifold has been on the motor for any reasonable amount of time, at least on mine, it required a lot of effort to separate the sections.


User's Signature: Why? Why do I always ask "why?" Because I can't learn or help teach others with "'cause I said so..."
replyreply
 Thanks given by: Old Driver


Messages In This Thread
RE: Exhaust manifold back pressure sensor tube - Hammerhead - 05-02-2018



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.