Injector leak test
04-21-2016, (Subject: Injector leak test ) 
Post: #22
RE: Injector leak test
(04-21-2016 )Wolff956 Wrote:  Hello all, new member here, just wanted to mention the tool that Cummins recommends for the injector leak test is a manometer, you can make one cheap using 1/4" vinyl tubing and it would make even small air leak noticeable when the water height changes in the opposed columns, Google DIY manometer

There a few guys making them on here for other members... They are not cheap if bought from Cummins, that is for sure.
replyreply


Messages In This Thread
Injector leak test - Coco620 - 04-09-2016,
RE: Injector leak test - mkmac - 04-09-2016,
RE: Injector leak test - Unilevers - 04-09-2016,
RE: Injector leak test - Rawze - 04-10-2016,
RE: Injector leak test - Rawze - 04-10-2016,
RE: Injector leak test - Unilevers - 04-12-2016,
RE: Injector leak test - Waterloo - 04-21-2016



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.