Alignments, Odd Tire wear, etc.

[Waterloo]

Like Brock said, the tires are probably done for. Michigan steers, I’m from Michigan, not that it matters, but I know the tires. Pin bushings and torque rods, if they are good, I would have the steers high speed balanced, and check the bearings in the steer hubs. Those tires are heavy, no clue if you are set up for them, were they an afterthought of the previous owner? Just put them on an axle not designed for such heavy rubber? Normally a 20,000 lb axle is called for. I could be wrong, but that is my understanding.