My Pete rebuild
11-10-2018, (Subject: My Pete rebuild ) 
Post: #271
RE: My Pete rebuild
You could have the axle surgeon replace the spindles for $1000 per spindle.
replyreply
11-10-2018, (Subject: My Pete rebuild ) 
Post: #272
RE: My Pete rebuild
He beat me too it ^^^^
And I know it's been said but , protorq,protorq,protorq axel nuts ...


User's Signature: The missing link
replyreply
 Thanks given by: Hammerhead
11-10-2018, (Subject: My Pete rebuild ) 
Post: #273
RE: My Pete rebuild
Already made my tri-county drive chasing parts and now everyone is closed. Next time the axles are pulled, I'll have protorque nuts to go on.

As for the axle surgeon, if it was just 1 spindle, or even 1 per axle, it would be worth it, but for an extra $2k, I'd rather just put in 2 new axle housings. Wear isn't critical as my original panic, and I'll never let them get neglected to the point that they were, so I went with conmet preloaded hubs.



It's going to be a long night, since I'm replacing and rebushing all of the cams too while I have things apart.

1 prepped, 3 to go.


replyreply





  
  
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication