My Pete rebuild |
10-11-2019, (Subject: My Pete rebuild ) Post: #390 | |||
| |||
RE: My Pete rebuild (10-11-2019 )Nostalgic Wrote: So I got a few good weeks after replacing the injectors, then noticed an oil leak from the rear injector cam cover. That plate is also the thrust retainer for the cam. It is supposed to rub on the flat area, but yours looks a bit excessive and at a slight angle. Perhaps bad machining on the head or cam areas? Or perhaps like maybe it ran dry at some point? -- BTW: if u ever do decide to tear into it again (and have the money for the parts), I would likely be up for helping you with it next time around so that its done 100% right. Be prepared to replace the head though if u bring it here -- I don't fool around with components even if they are slightly questionable. And your right, that high oil consumption is too high for a fresh inframe. User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!. | |||
« Next Oldest | Next Newest » |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.