Procedure for Cleaning Glycol from isx15 Engines

[imalumberjack]

(06-16-2018 )Waterloo Wrote:  What are you doing? Did you already do the in frame? New liners, pistons, bearings, etc? I'm scratching my head here? Because that is when you should have cleaned the motor out, during the tear down.

Or are you still in tear down mode? If what you said happened, valve and liner, you will need a new head and an in frame kit, and have the block machined. Please explain where you are at in this, what you have done and where are you in the process.

I'm thinking he just replaced the bad liner and repaired head? Waterloo how bout if he used the same method as you when you prelubed your engine? maybe pushing some light oil through?