| Penetrating oils |
| 07-03-2018, (Subject: Penetrating oils ) Post: #5 | |||
| |||
RE: Penetrating oils (07-03-2018 )pearce trucking Wrote: Can that corrosion x be used on the deck while doing an inframe? yes it can. just be sure to use remove it before putting the head gasket on. It comes off quite easily with acetone, as it stays kinda "thick and wet" compared to the other marine sprays I mentioned that dry and harden. Waterloo used it on the crank, deck, block, cams, rockers, face gears, literally everything while his engine was apart. Nothing ever rusted. User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!. | |||
| « Next Oldest | Next Newest » |
| Messages In This Thread |
Penetrating oils - kryten - 07-03-2018, RE: Penetrating oils - Rawze - 07-03-2018, RE: Penetrating oils - Brock - 07-03-2018, RE: Penetrating oils - pearce trucking - 07-03-2018, RE: Penetrating oils - Rawze - 07-03-2018 RE: Penetrating oils - pearce trucking - 07-03-2018, RE: Penetrating oils - Kid Rock - 07-03-2018, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.