Help with pulling the programming from the ecm
08-04-2018, (Subject: Help with pulling the programming from the ecm ) 
Post: #11
RE: Help with pulling the programming from the ecm
(08-04-2018 )snailexpress Wrote:  
(08-04-2018 )Evotrucker Wrote:  So I made it back to the shop to pull the programming from the ecm.... I'm on insite trying to find how and can't. I figured it would be intuitive. Uni told me to pull a file called C@ltr!m? Can someone tell me how or where this s.o.b is at.

Thanks ahead of time.
C@ltr!m is program to work with calibration file.
If you don't have C@ltr!m you can't. Uni can establish remote connection with yours ECM if you have Inline adapter.
Don't think Cummins shop will participate.


User's Signature: The creator said " Help your self and I will help you; Protect your self and I will protect you "
replyreply


Messages In This Thread
RE: Help with pulling the programming from the ecm - Evotrucker - 08-04-2018



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.