Another 870 thread- Engine vibration
04-27-2019, (Subject: Another 870 thread- Engine vibration ) 
Post: #8
RE: Another 870 thread- Engine vibration
What does Insite say the status of the shut off solenoid?

What is your fuel pressure getting to while cranking?

Using Insite, Go to Data Monitor/Logger then Hard starting. It'll bring up a list of sensors and parameters that are involved with starting the truck. Start your troubleshooting there. Make sure those sensors are in the correct position for starting the engine. Also make sure they are reaching the correct pressures and voltages during cranking.
replyreply
 Thanks given by: ZeroNthedark


Messages In This Thread
RE: Another 870 thread- Engine vibration - Chamberpains - 04-27-2019



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.