After treatment history
09-22-2018, (Subject: After treatment history ) 
Post: #10
RE: After treatment history
Check out the ECM Time column, yours is trying to regen too often. I looked at an old work order when everything was working correctly on mine it was right there at a hundred hours.


Attached File(s)Thumbnail(s)
   


User's Signature: 0, 255, 65535 ain't always OF
replyreply
 Thanks given by: Rawze
09-23-2018, (Subject: After treatment history ) 
Post: #11
RE: After treatment history
I'll keep and eye on it just got insite for it a new start on thing to watch
replyreply
09-23-2018, (Subject: After treatment history ) 
Post: #12
RE: After treatment history
(09-22-2018 )schISM Wrote:  Check out the ECM Time column, yours is trying to regen too often. I looked at an old work order when everything was working correctly on mine it was right there at a hundred hours.

thanks for sharing that. The 2350 seems to not regen nearly as often as my older 871. Its a shame they are just as unreliable.


User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
replyreply
 Thanks given by: schISM
09-23-2018, (Subject: After treatment history ) 
Post: #13
RE: After treatment history
Cents I change the doser and the nox sensors behind the turbo do I need to reset anything or just leave it alone
replyreply
09-23-2018, (Subject: After treatment history ) 
Post: #14
RE: After treatment history
Healthy 871s in Australia go between 80-100hrs between burns. There are also several revisions of DPF filters with different flow rates and ash plugging limits.
replyreply
 Thanks given by: Rawze





  
  
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication