Rawze.com: Rawze's ISX Technical Discussion and more / Big Truck Technical Discussion... / Things that may help others... / Chasing vibrations...Don't leave out the clutch

new reply
Chasing vibrations...Don't leave out the clutch
07-31-2016, (Subject: Chasing vibrations...Don't leave out the clutch ) 
Post: #6
Contributing V.I.P.Hedley Offline
Contributing V.I.P.  (57 Likes)  ****

 		Posts: 133
Joined: Jun 2015
Thanks: 57
Given 57 thank(s) in 35 post(s)
RE: Chasing vibrations...Don't leave out the clutch
Go with an Eaton Solo Clutch, don't forget to reseal your engine bell housing and replace the input shaft on your transmission as well.

http://www.eaton.com/Eaton/ProductsServi.../index.htm

User's Signature: In the immortal words of Romeo as he gazed upon Juliet's eyes..."Wait...We Drank What?!"
Return to Top | find
replyreply
new reply


Messages In This Thread
RE: Chasing vibrations...Don't leave out the clutch - Hedley - 07-31-2016



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication