Another oil pressure thread
11-15-2018, (Subject: Another oil pressure thread ) 
Post: #18
RE: Another oil pressure thread
(11-15-2018 )Peashooter67 Wrote:  Rawze sir

Oil journal pressure tests are done. Good news........ no cracks...
Doing plastigauge on rod and mains this week.

Sir

Is the creances on both rod and main bearings .002-.003?

I think its 0.002" - 0.005", not sure these days.

Also, has anyone checked the rockers + rocker shafts and injector rockers + injector shafts? to make sure they are all in spec? -- excess clearances there will cause low oil pressure too.

Could also be a engine brake solenoid hemoraging oil badly too.

Just some more thoughts on it. Hopefully it will be something stupid simple that god missed during the inframe.

For all you know, there may be a bearing missing int the new head somewhere. Seen that too.


User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
replyreply


Messages In This Thread
RE: Another oil pressure thread - Rawze - 11-15-2018
RE: Another oil pressure thread - Unilevers - 02-03-2020,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.