Another oil pressure thread

[Peashooter67]

(11-15-2018 )Rawze Wrote:  I think its 0.002" - 0.005", not sure these days.

Also, has anyone checked the rockers + rocker shafts and injector rockers + injector shafts? to make sure they are all in spec? -- excess clearances there will cause low oil pressure too.

Could also be a engine brake solenoid hemoraging oil badly too.

Just some more thoughts on it. Hopefully it will be something stupid simple that god missed during the inframe.

For all you know, there may be a bearing missing int the new head somewhere. Seen that too.

Just installed all new rockers and both shafts to the tune of $4,400 and did not fix the issue