Another oil pressure thread
11-16-2018, (Subject: Another oil pressure thread ) 
Post: #28
RE: Another oil pressure thread
I don't think the sum of slightly bigger gap in main and rods will take pressure down so much.
As you can see on my picture it was 3 or 4 injector cam bearings completely out and pressure wasn't so bad.
But I may be wrong.
replyreply
 Thanks given by: Rawze


Messages In This Thread
RE: Another oil pressure thread - snailexpress - 11-16-2018
RE: Another oil pressure thread - Unilevers - 02-03-2020,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.