Jemali Tripac APU case

[Rawze]

(12-31-2018 )Lonestar10 Wrote:  Anyone have any experience with them?

my apu case is rotted out and its over 800$ for new steel components and i found these guys should never have to worry again.

https://www.jemali.net/product/thermo-ki...minum-box/

looks like it would have problems with stress cracking 2x more than the OEM box does to me.

the frame suffers as much as anything else in the Tri-pak.

You want to protect it properly? -- pull the guts out of it, engine and all , strip then correseal the frame and all the panels, por-15 them, add a few more top coats and put it back together. Replace all the bushings + motor mounts while your at it.