2350 Fueling Issues
01-09-2019, (Subject: 2350 Fueling Issues ) 
Post: #11
RE: 2350 Fueling Issues
Basically pull the head. Bump a little air in the inlet so the plungers come out. Pull the springs off. Mark which spring is which. Book says they need to go back on the same side. Hold your finger over the outlet and the hole in the head in between the barrels. Push the exit plunger down. If it comes back up it’s good. Mine will go down 1 time and that’s it.
replyreply
 Thanks given by: snailexpress


Messages In This Thread
RE: 2350 Fueling Issues - Unilevers - 01-06-2019,
RE: 2350 Fueling Issues - Unilevers - 01-07-2019,
RE: 2350 Fueling Issues - CANNONBALL - 01-09-2019



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.