placement of jack stands front end prostar
01-22-2019, (Subject: placement of jack stands front end prostar ) 
Post: #1
placement of jack stands front end prostar
not sure where I can set jack stands under front of a 2011 prostar. would like to let the suspension hang and look and shackles, bushings and the like. there is a cross member at the front of the frame rails but doesn't look sturdy enough to support 12k. behind the shackles would mean an increase in weight bearing load. I have 6 and 12 ton stands. rails are blocked by the leaf springs so where to go? thanks in advance.


User's Signature: 2011 Prostar Cummins 871
replyreply
 Thanks given by: rrod
01-22-2019, (Subject: placement of jack stands front end prostar ) 
Post: #2
RE: placement of jack stands front end prostar
Crossmember in front of engine
replyreply
 Thanks given by: Waterloo , 74bassman




NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.