2006 9400i with 870 isx.. do data link in dash
02-20-2019, (Subject: 2006 9400i with 870 isx.. do data link in dash ) 
Post: #1
2006 9400i with 870 isx.. do data link in dash
no data in dash..lights are flash gauges are pointing down
gauges cycles when ignition, then after a few secs no data link
replyreply
02-20-2019, (Subject: 2006 9400i with 870 isx.. do data link in dash ) 
Post: #2
RE: 2006 9400i with 870 isx.. do data link in dash
Check the breakers in the glove box. Make sure none are tripped.

When did the problem start? Anything special happening at that time?
replyreply
02-20-2019, (Subject: 2006 9400i with 870 isx.. do data link in dash ) 
Post: #3
RE: 2006 9400i with 870 isx.. do data link in dash
after truck was washed
replyreply
02-20-2019, (Subject: 2006 9400i with 870 isx.. do data link in dash ) 
Post: #4
RE: 2006 9400i with 870 isx.. do data link in dash
(02-20-2019 )wellrun Wrote:  after truck was washed

check all the cab plugs. maybe the J1708 0r J1939 connections shorted out?.


User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
replyreply
02-21-2019, (Subject: 2006 9400i with 870 isx.. do data link in dash ) 
Post: #5
RE: 2006 9400i with 870 isx.. do data link in dash
When i get a chance later today, I'll see if I can dig up a copy of the schematic for the data link wires. But for now check your firewall connectors. The round 1's on the driver side (turn counter clockwise to remove) and the rectangular 1's on the passenger side (I believe its a 1\4" socket needed to remove them) also as Rawze said remove the ECM connectors and give them a check. they possibly washed dirt or water or even loosened or cut wires at those connectors with their high pressure wand.
replyreply




NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.